PDI® Flat Bow

EDT Sharp Shooter: “Just installed a Hiperfire EDT and must admit that the install was easy and clean. Had really no problems getting everything in place and pinned down. You do notice that the springs are heavier than stock when installing. The Trigger does have very slight creep and is a crisp fire. I’m impressed with it – did my research on all the other triggers on the market and seen many videos – I chose this trigger group because of the quality, look and options you get for the price paid. I’m very very happy with the product I received and the choice made.”

HIPERTOUCH Elite: “I just installed a Hyperfire Elite trigger in my AR-10. My goal was to cure some fail to fire issues due to light primer strikes using some foreign military surplus ammo. I have only installed an AR trigger once before and was thinking the Hyperfire trigger could be a problem for me to install. It was way easier than I thought. I did learn one trick to pass along. The trigger and hammer installation is very straight forward. Compressing the coil springs looked like a problem area. I used a 5/32 inch pin punch (flat working end) and cupped my free hand over the spring assembly to prevent lost springs. Success on the first attempt with no flying parts. The trick is to position the yoke just above the notch where it will rest. Push straight in and slightly downward and it falls right into place. The difference between the Elite trigger and military stock trigger is amazing.”