PDI® MCX

HIPERTOUCH Elite: “I just installed a Hyperfire Elite trigger in my AR-10. My goal was to cure some fail to fire issues due to light primer strikes using some foreign military surplus ammo. I have only installed an AR trigger once before and was thinking the Hyperfire trigger could be a problem for me to install. It was way easier than I thought. I did learn one trick to pass along. The trigger and hammer installation is very straight forward. Compressing the coil springs looked like a problem area. I used a 5/32 inch pin punch (flat working end) and cupped my free hand over the spring assembly to prevent lost springs. Success on the first attempt with no flying parts. The trick is to position the yoke just above the notch where it will rest. Push straight in and slightly downward and it falls right into place. The difference between the Elite trigger and military stock trigger is amazing.”

HIPERTOUCH® Competition: “I seldom find anything these days that either lives up to it’s claims or excites me at all. This trigger does both in a big way! You folks should be very very proud!” And, a few weeks later, “Still loving my Hipertouch Competition after thousands of rounds. There has been absolutely no change in pull weight, and it’s ultra reliable! It’s the single best upgrade to an AR platform that I have ever experienced. Thank you again for a superior product.”