X2S® MOD-3
$225.00
In stock (can be backordered)
FEEL WHAT YOU BECOME®
DESCRIPTION
HIPERFIRE® is simply unmatched in performance and reliability. We have broken all of the standards in single-stage AR triggers with our HIPERTOUCH® family, and now we have done the same in our new X2S™ family of two-stage triggers. Whether you shoot competitively, train to defend yourself and your family, or you simply want to enjoy shooting out on the range, ensuring your rifle functions properly every time, without fail, is important. Our new two-stage triggers feature the same technology that HIPERFIRE has become known for. Radical Sear Mechanics™, Cam-Over Toggle Engine™, Soft Start Lock-Up™, Tactile Weightless Break™, user adjustable pull weights, mil-grade components, and precision manufacturing processes come together to make one of the most robust two-stage triggers available today. The MOD-3 design has a shorter first stage than MOD-1 for a faster first stage prep. It shares the same sear geometry and performance as its MOD-2 counterpart, but has a flat trigger bow with our patented HIPERSHOE® and an upgraded Black Nitride coating. This trigger can be used with or without the included HIPERSHOE.HIGHLIGHTS
- Two-stage AR trigger
- Minimal, user adjustable, 2 - 3 pound first stage
- Minimal second stage wall with a 1 1/2 pound weight
- Total 3 1/2 - 4 1/2 pound pull with green or red springs respectively
- Distinct wall between first and second stages allows for effective "prepping" of the trigger for added control
- Clean, effortless break
- Weightless, imperceptible over-travel
FEATURES
- Cam-Over Toggle Engine allows for lighter pull weights without losing hammer strike energy
- Soft Start Lock-Up aids in eliminating rifle "flinch" after the break for more accurate shots at distance
- Radical Sear Mechanics allow for the use of heavier hammer springs to aid in longevity and eliminating light primer strikes
- Tactile Weightless Break means there is no mushy over-travel after the break
- Flat trigger bow
- HIPERSHOE finger pad reduces the perceived trigger pull weight for a lighter feel
- First stage slightly shorter than the MOD-1 design
- Same sear design as its MOD-2 counterpart, but a flat trigger bow with upgraded Black Nitride coating
- Application: AR15, AR10, AR9/PCC variants (including Sig Sauer MPX)
- Trigger Type: Two-Stage, Semi-Drop-In
- 1st Stage: Minimal, 2 - 3 pound pull with green or red springs respectively
- 2nd Stage: Minimal "wall", +1 1/2 pounds with either green or red springs
- Total Pull Weight: 3 1/2 - 4 1/2 pounds with green or red springs respectively
- User Adjustable: Yes
- Trigger Bow: Flat with HIPERSHOE included
- Finish: Black Nitride
HIPERTOUCH Genesis: “I got the Genesis for my AR10 (716 Sig)… I was completely blown away, as was the target! The very first shot was quite a surprise as I put the tip of my finger lightly on the trigger (as I could tell putting it together it was going to be a lot lighter than the stock one I took out). I just “thought fire” and the thought went from my brain to the firing pin, seeming to bypass the trigger. Later I found that I could not outpace the fire control I had installed. If you’re worried about getting your money’s worth out of this (as I was), I say now that it was WORTH EVERY CENT SPENT!! (even the shipping)”
HIPERTOUCH® Competition: “I picked up a Hyperfire [sic] from a prize table at a 3 Gun match. I installed it in my DPMS 308 that I use for 3 Gun in place of the JP trigger that was in it. What a difference. – The JP let off at 4.25 lbs and was clean and crisp. But in spite of the heavy-for-3 Gun pull, I had issues with it not setting off some ammo. Surplus ammo was the worst with about an 75% fire rate. Even Hornady Steel Match wouldn’t go bang. Actually none of the Hornady SM rounds would go off. They would fire in my M700 Remington however so it had to be a rifle issue. – After changing out the JP for the Hyperfire [sic], every round of every ammo tested fired. Surplus MG ammo that I had pulled from links even fired 100%. And no more issues with Hornady SM. Surprisingly, this ammo was now firing in a rifle with a less than 2# trigger pull. This is with the lightest (silver) coil springs installed. And because of that, my accuracy has improved. – I was so impressed, I bought two more Hyperfires [sic]. One is in my Tac Optics rifle and one in my Tac Irons rifle. – The Hyperfire [sic] has more take up than the JP and several other triggers I have tried. But when shooting rapidly, as is often done in competition, I tend to let off more than necessary to reset. For me, an AR trigger like the very short take-up/reset AR Gold trigger isn’t really a benefit. – I will continue to use the JP triggers I have in some other working and fun rifles because they are reliable and do the job. And since I am not sponsored by anyone and have to pay for my own equipment, I have to budget for those parts I want and spend wisely. But if I build any more competition rifles, especially ones that might be used in rapid fire, they will have Hyperfire [sic] triggers in them.”
