Women's HIPERFIRE Logo Tee from Nine Line Apparel
HIPERTOUCH Elite: “I just installed a Hyperfire Elite trigger in my AR-10. My goal was to cure some fail to fire issues due to light primer strikes using some foreign military surplus ammo. I have only installed an AR trigger once before and was thinking the Hyperfire trigger could be a problem for me to install. It was way easier than I thought. I did learn one trick to pass along. The trigger and hammer installation is very straight forward. Compressing the coil springs looked like a problem area. I used a 5/32 inch pin punch (flat working end) and cupped my free hand over the spring assembly to prevent lost springs. Success on the first attempt with no flying parts. The trick is to position the yoke just above the notch where it will rest. Push straight in and slightly downward and it falls right into place. The difference between the Elite trigger and military stock trigger is amazing.”
HIPERTOUCH Genesis: “If you want a decent trigger pull on your 5.45×39 Ar15 or M4, the Hiper Touch is the ONLY solution that has enough hammer force to 100% reliably ignite the hard Russian primers. I have been searching several years for this solution and the Hiper Touch was the ONLY successful solution. Trust me on this one because I have done the research myself and wasted a lot of money on other premium triggers that would not do the job.”