HIPERFIRE® Chamber Safety Flag
HIGHLIGHTS
- Universal chamber safety flag
- Will into any .223/5.56 caliber and larger pistol/rifle/shotgun open breech
- Held in place by the closed bolt
HIPERTOUCH Elite: “I just installed a Hyperfire Elite trigger in my AR-10. My goal was to cure some fail to fire issues due to light primer strikes using some foreign military surplus ammo. I have only installed an AR trigger once before and was thinking the Hyperfire trigger could be a problem for me to install. It was way easier than I thought. I did learn one trick to pass along. The trigger and hammer installation is very straight forward. Compressing the coil springs looked like a problem area. I used a 5/32 inch pin punch (flat working end) and cupped my free hand over the spring assembly to prevent lost springs. Success on the first attempt with no flying parts. The trick is to position the yoke just above the notch where it will rest. Push straight in and slightly downward and it falls right into place. The difference between the Elite trigger and military stock trigger is amazing.”
HIPERTOUCH Elite: “No experience with gunsmithing. This trigger was very simple to install. Anyone can do it. Great instruction video and brochure. Excellent feel when firing. I am use to my long range rifle which has an extremely light and smooth trigger pull. Even with the lightest springs it is only slightly harder to pull but very smooth. Great product!!!!!”