HIPERCOMP® 762 AK Next Gen

HIPERTOUCH® Elite: “Installed my new Elite in Stag 3G in under 4 minutes. I have quite a bit of experience installing AR Triggers that require very precise adjustment of pre- and over-travel that when done incorrectly can cause doubling and other problems. This trigger is so simple to install that a first timer could do it in 5 minutes after watching the well made video instructions. I don’t like 2 stage triggers and to get a good, light single stage trigger you have to risk light primer strikes which can ruin your day in a timed event. This trigger is as good as any single stage trigger I own and the hammer energy is ridiculously powerful. The lock time is much faster which helps my offhand shooting. This trigger is so robust I doubt if you could ever wear it out and it is built like a tank. Great feel, fast lock time, ease of installation and competitive price. Not much more you could ask from a trigger.”

HIPERTOUCH Elite: “I just installed a Hyperfire Elite trigger in my AR-10. My goal was to cure some fail to fire issues due to light primer strikes using some foreign military surplus ammo. I have only installed an AR trigger once before and was thinking the Hyperfire trigger could be a problem for me to install. It was way easier than I thought. I did learn one trick to pass along. The trigger and hammer installation is very straight forward. Compressing the coil springs looked like a problem area. I used a 5/32 inch pin punch (flat working end) and cupped my free hand over the spring assembly to prevent lost springs. Success on the first attempt with no flying parts. The trick is to position the yoke just above the notch where it will rest. Push straight in and slightly downward and it falls right into place. The difference between the Elite trigger and military stock trigger is amazing.”