HIPERCOMP 556 Next Gen

HIPERTOUCH Elite: “I just installed a Hyperfire Elite trigger in my AR-10. My goal was to cure some fail to fire issues due to light primer strikes using some foreign military surplus ammo. I have only installed an AR trigger once before and was thinking the Hyperfire trigger could be a problem for me to install. It was way easier than I thought. I did learn one trick to pass along. The trigger and hammer installation is very straight forward. Compressing the coil springs looked like a problem area. I used a 5/32 inch pin punch (flat working end) and cupped my free hand over the spring assembly to prevent lost springs. Success on the first attempt with no flying parts. The trick is to position the yoke just above the notch where it will rest. Push straight in and slightly downward and it falls right into place. The difference between the Elite trigger and military stock trigger is amazing.”

HIPERTOUCH® Competition: “Hey guys, I was hoping to post this directly on your page. Last season I knew I needed a better trigger on my competition AR-15 After doing tons of research and talking to everyone at 3-gun matches I knew it had to be the Competition. I picked one up from you guys at The International Multigun at Rockcastle. What a difference it made in my long game! The next 2 matches I shot my performance with the rifle went way up. I had planned to drop one in my practice AR15-22 but you guys beat me to it. Because you guys are involved in our sport of 3-gun and gracious sponsors of 3GN I won the trigger set from Rockcastle. I just wanted to say thank you for making such a great product and thank you for all you do for this sport. See ya at Shot Show.”