HIPERCOMP® 9mm Next Gen
FEEL WHAT YOU BECOME®
HIGHLIGHTS
- High Performance Recoil Muzzle Compensator
- Same Size as MIL Flash Hider
- M9/M10 Bayonet Compatible
- Best-in-Class Recoil Reduction
Standard Benefits
- Caliber: 9mm Luger
- Muzzle Thread: 1/2-28 UNEF RH
- Weight: 2.4 oz
- Crush Washer Included
- Installs w/ MIL Armorer's Wrench
HIPERTOUCH® Competition: “Just put one of the new hipertouch Competition straight triggers in my gun. It is the best trigger I have ever felt. I have used everything out there over the years and this has the best feel. Light, quick reset. Cant see going back to something else.”
HIPERTOUCH Elite: “I just installed a Hyperfire Elite trigger in my AR-10. My goal was to cure some fail to fire issues due to light primer strikes using some foreign military surplus ammo. I have only installed an AR trigger once before and was thinking the Hyperfire trigger could be a problem for me to install. It was way easier than I thought. I did learn one trick to pass along. The trigger and hammer installation is very straight forward. Compressing the coil springs looked like a problem area. I used a 5/32 inch pin punch (flat working end) and cupped my free hand over the spring assembly to prevent lost springs. Success on the first attempt with no flying parts. The trick is to position the yoke just above the notch where it will rest. Push straight in and slightly downward and it falls right into place. The difference between the Elite trigger and military stock trigger is amazing.”