Enhanced Duty Trigger® Select Fire
$149.00
Available on backorder
FEEL WHAT YOU BECOME®
HIGHLIGHTS
- Significant MIL Upgrade
- NFA, LE/SWAT, MIL
- M4/M16, Single Stage Full-Auto Select-Fire
- US Patents: 9052149, 9175917, 9696103, D817436, 10006733
BONUS BENEFITS
- Radical Sear Mechanics™
- Medium Weights, 4½ and 5½ lb. Pulls
- Smooth
- Accurate
- MIL++ Heavy Duty Hammer Springs
- Very Hard Hammer Strikes
- High Power Touch Off for Ultimate Accuracy
- Yet, Medium Pull Weights
Standard Benefits
- Crisp, Clean, Trigger Break
- Very Short Over-Travel
- Very, Positive Reset You Can Feel and Hear
- Made In The USA
HIPERTOUCH Elite: “I just installed a Hyperfire Elite trigger in my AR-10. My goal was to cure some fail to fire issues due to light primer strikes using some foreign military surplus ammo. I have only installed an AR trigger once before and was thinking the Hyperfire trigger could be a problem for me to install. It was way easier than I thought. I did learn one trick to pass along. The trigger and hammer installation is very straight forward. Compressing the coil springs looked like a problem area. I used a 5/32 inch pin punch (flat working end) and cupped my free hand over the spring assembly to prevent lost springs. Success on the first attempt with no flying parts. The trick is to position the yoke just above the notch where it will rest. Push straight in and slightly downward and it falls right into place. The difference between the Elite trigger and military stock trigger is amazing.”
Absolute best trigger I own. (I have the 24g model. It was updated to the Reflex) Set it for 2.5 lbs. Breaks like glass, no creep, about 2mm very audible reset. I have 3k plus rounds on it. Brass and steel. Longest run before cleaning rifle was 900 rounds in one day. NEVER had a trigger hiccup.
