HIPERFIRE Trucker Hat

HIPERTOUCH Elite: “I just installed a Hyperfire Elite trigger in my AR-10. My goal was to cure some fail to fire issues due to light primer strikes using some foreign military surplus ammo. I have only installed an AR trigger once before and was thinking the Hyperfire trigger could be a problem for me to install. It was way easier than I thought. I did learn one trick to pass along. The trigger and hammer installation is very straight forward. Compressing the coil springs looked like a problem area. I used a 5/32 inch pin punch (flat working end) and cupped my free hand over the spring assembly to prevent lost springs. Success on the first attempt with no flying parts. The trick is to position the yoke just above the notch where it will rest. Push straight in and slightly downward and it falls right into place. The difference between the Elite trigger and military stock trigger is amazing.”

HIPERTOUCH® Genesis: “Great trigger system. I made my first build with the standard mil-spec fcg. Dry firing, before I had fired the first shot, I knew that I needed to upgrade the trigger. I found this trigger on the PSA site, and looked at all of the promotional videos on YouTube. I ordered this trigger in the LPK… A quick swap of triggers when the HIPERTOUCH® came and I have been very pleased with the result. It is smooth where the standard fcg is rough and drags. It has a much lower pull weight (I am using the middle setting and it is very nice). I am really happy with this purchase. I would recommend this trigger to most anyone looking for an upgrade.”