Enhanced Duty Trigger® 2-Stage
FEEL WHAT YOU BECOME®
Coming Soon...
HIGHLIGHTS
- For Use in AR-15/10 Platforms
- Not for use in PCC/Blowback Applications
- 2-Stage trigger upgrade
- Improvement over any Mil-spec trigger
BONUS BENEFITS
- Radical Sear Mechanics™
- Smooth
- Accurate
- 2 User-Selectable Pull Weights With
- Blue Hammer Spring: 3.5lb 1st Stage With a +1lb 2nd Stage, for a Total Pull of 4.5lbs
- Green Hammer Spring: 4.5lb 1st Stage With a +1lb 2nd Stage, for a Total Pull of 5.5lbs
- Heavy Duty Hammer Springs
- Hard Hammer Strikes
- Medium Pull Weights
Standard Benefits
- Positive 2nd Stage Wall
- Crisp, Clean Trigger Break
- Short Over-Travel
- Positive Reset You Can Feel
- Made In The USA
HIPERTOUCH® Genesis: “Best trigger for an AR. My groups on a DPMS LR308 tighted up from 1 MOA to 1/4 MOA.”
HIPERTOUCH Elite: “I just installed a Hyperfire Elite trigger in my AR-10. My goal was to cure some fail to fire issues due to light primer strikes using some foreign military surplus ammo. I have only installed an AR trigger once before and was thinking the Hyperfire trigger could be a problem for me to install. It was way easier than I thought. I did learn one trick to pass along. The trigger and hammer installation is very straight forward. Compressing the coil springs looked like a problem area. I used a 5/32 inch pin punch (flat working end) and cupped my free hand over the spring assembly to prevent lost springs. Success on the first attempt with no flying parts. The trick is to position the yoke just above the notch where it will rest. Push straight in and slightly downward and it falls right into place. The difference between the Elite trigger and military stock trigger is amazing.”
