HIPERFIRE Mindset Banner

HIPERTOUCH Elite: “I just installed a Hyperfire Elite trigger in my AR-10. My goal was to cure some fail to fire issues due to light primer strikes using some foreign military surplus ammo. I have only installed an AR trigger once before and was thinking the Hyperfire trigger could be a problem for me to install. It was way easier than I thought. I did learn one trick to pass along. The trigger and hammer installation is very straight forward. Compressing the coil springs looked like a problem area. I used a 5/32 inch pin punch (flat working end) and cupped my free hand over the spring assembly to prevent lost springs. Success on the first attempt with no flying parts. The trick is to position the yoke just above the notch where it will rest. Push straight in and slightly downward and it falls right into place. The difference between the Elite trigger and military stock trigger is amazing.”

HIPERTOUCH Reflex: “I bought the Reflex trigger for my 3 gun rifle and to try it in a 7.62×39 rifle that I was having light primer strikes. It works absolutely wonderful in my 3 gun rifle. When I ran it in my x39 build I still had the LPS. I contacted Hiperfire through their contact portion of their site. I was contacted back very quickly and was offered another set of toggle springs and a red hammer spring. I received them today and installed them asap. Made a quick trip to the range and the new springs fixed my problems. I will be ordering another one of these triggers as soon as the budget will allow me. I have 2 coworkers who are letting me be the Guiney pig at building a x39 platform that are going to be building theirs pretty much identical to mine now that I have mine running 100% without problems. Thank you hiperfire as now I will be building 2 more of these rifles with your triggers in them and I look forward to building more for myself in the future.”