SHOT Show 2017 Video Loop Shown on HIPERFIRE’s 75″ HDTV @ Its Booth #3016February 3, 2017
HIPERFIRE put together a 20 minute loop highlighting is trigger family’s features along with interesting info on its HIPERGRIP product line that began selling late last year and its new HIPERCOMP to be released in Spring 2017. All products were demonstrated at the VFOB Try and Buy event the Sunday and Monday before SHOT and at Industry Day at the Range event the Monday before SHOT with great applause. Be on the look out for us at NRA 2017 and at various match events and other places. 2017 will be a break out year.
HIPERFIRE Introduces HIPERGRIP, the High Performance Grip for the MSROctober 31, 2016
HIPERFIRE®’s pistol grip for the MSR is immediately available today. HIPERGRIP™ is a high performance grip. The name also describes the hold and control that the shooter now has over his rifle, SBR, or pistol. It comes in four versions, same grip with and without a textured finish and with and without the HIPERFIRE® colored logo. For more information, watch the introduction video and view the product videos on their respective pages.
HIPERFIRE Previews It’s SHOT SHOW 2016 Booth #3016December 23, 2015
SHOT SHOW 2016 is almost upon us. See the HIPERFIRE booth layout here. Of course, we’ll have triggers, but also some new stuff that’s not triggers. Curious? Visit the booth to see, touch, and DREAM!
HIPERFIRE Annouces Arrival of the EDT3October 26, 2015
HIPERFIRE announces availability of its new Enhanced Duty Trigger3 AR fire-control for the AR15/10 rifle that completes HIPERFIRE’s enhanced duty trigger line up. It features the novel “duplex” trigger bow with two finger pad rests, one high and one low. In the high position, the trigger pull weights are five and six pounds; in the low position, the weights are four and five pounds. The range limits depend on which hammer spring was installed, the red or green (both springs are included with the product). Like the EDT2’s more massive hammer head, more collision power is carried into the firing pin to reliably ignite 308/762 NATO cartridges while still exhibiting faster lock time than stock alternatives. It’s a HIPERTOUCH alright featuring only a hint of creep, a smooth flat stroke with an equally smooth and very positive reset that users of HIPERTOUCH® FCGs have come to appreciate. The MSRP is $99.
HIPERFIRE Announces the ECLipse FCGOctober 7, 2015
HIPERFIRE announces the immediate availability of the HIPERTOUCH® ECLipse (ECL) AR fire-control group (FCG). This FCG’s performance eclipses that of every other HIPERFIRE trigger product including the 24Competition. It was developed as part of a 3-gun match series promotion. That promotion just ended with the HIPERFIRE Rifle Challenge and the trigger now sport a new, more evocative name. HIPERFIRE didn’t think it could improve on the 24Competition product offering, but it did. Your trigger finger will feel the difference from the 24C as a definite step up. It sports a Black adjustable HIPERSHOE and a Nickel based enhanced plating exclusive to the ECL making the pull even smoother and more responsive (among other things) at an MSRP of $275. Please note that this and HIPERFIRE’s other trigger offerings aren’t just for 3-gun, but to anyone who demands the best. Visit the product’s page to learn more.
HIPERFIRE Rifle Challenge, Oct 2/3, 2015September 10, 2015
HIPERFIRE (Title Sponsor) and F-1 Firearms the (Presenting Sponsor) offer a unique competition match produced by Tar Heel 3 Gun and held at Woody’s Hunt and Rifle Club in New Hill, North Carolina. Seven rifle-only divisions will be featured depending on the registration mix from standard to short barreled, light to heavy cartridges, with and without magnified optics, and with 18-30 targets at long ranges out to 500 yards. Juniors as well as active duty or retired MIL/LEO are being welcomed to attend and compete. Competitors can expect to shoot approximately 350 rounds. HIPERFIRE is excited to see more and more 3-gunners run its line of high performance triggers, most especially its 24 3Gun, 24Competition, and TarHeel 24. The match will feature cash payouts in addition to random drawings and of course the common prize-table for all stages. Find photos and videos of the competition here and on FaceBook after the match. For more match and registration information, visit TarHeel3Gun.com.
HIPERTRAIN™ Demonstrator ArrivesAugust 31, 2015
HIPERTRAIN is short for HIgh PERformance TRAINer. It starts shipping today! MSR rifle competitors can use it to train their trigger finger muscle memory for matches with their match trigger group installed. MIL-operators can use it to train for mission challenge demands. And retailers can use it to show off HIPERTOUCH® trigger system features at the sales counter, or the features of any other AR FCG for that matter. The HIPERTRAIN™ demonstrator feels just like your rifles’ trigger in the shooting hand. Install the pistol grip and safety/selector of choice. The product comes with a rubber bumper already installed to catch hammer fall. MSRP is $30.
HIPERFIRE Announces Arrival of the EDT2August 19, 2015
The HIPERTOUCH® EDT (Enhanced Duty Trigger) is now a product line with introduction of the EDT2. It’s available and shipping. It’s the MIL-spec semi-auto upgrade designed for LE department approvals, NRA Service Rifle competitors, and those who want or need a home defense or utility rifle with a minumum pull weight of 4½ lbs. The trigger is user adjustable to 4½+ and 5½+ lbs while maintaining MIL-spec hammer strike energy and made 308/762 NATO capable by adding some mass to the hammerhead over the EDT; a unique specification among aftermarket AR trigger upgrades making this an ideal OEM trigger offering. Read more about it here on the EDT product page and watch the video.
HIPERSHOE® Patent ReleaseJune 9, 2015
HIPERFIRE receives patent protection rights for the HIPERSHOE® adjustable trigger bow device with the issuance of U.S. Patent 9,052,149 on this date. This FCG innovation adds 5 adjustable weight divisions to each toggle spring pair weight adjustment on the 24C and new TH24 triggers by changing leverage on the trigger bow. It also makes finger placement eaiser and more dependable when shooting demands speed during finger placement in drills, competition, and hell-fire. And, it increases finger flesh pad contact area, which makes the trigger very responsive to finger movement. No other AR FCG can do that, among other things. Other HIPERTOUCH® patents are pending. Go to HIPERFIRE’s Facebook page to see the first page of the patent.
The New TarHeel 24 3*Gun Comp Trigger ArrivesJune 8, 2015
HIPERFIRE and Tarheel 3-Gun announces the immediate availability of the HIPERTOUCH® Tarheel 24 (TH24) trigger system. Tarheel 3 Gun invited HIPERFIRE’s match sponsorship early in 2013. Since then, shooters from around the country have won HIPERFIRE®’s triggers off the prize tables and compared shooting notes that has established HIPERFIRE’s good reputation not only for trigger design in-novation, but most importantly performance and reliability. HIPERFIRE is very appreciative of Tarheel 3-Gun’s role in cementing HIPERTOUCH® triggers’ place in high per-formance shooting. So, HIPERFIRE and Tarheel 3-Gun have now taken the next step to jointly promote a new signature trigger and further promote the shooting sports in general, because as we all know, shooting the best equipment is not just for 3-gun. HIPERFIRE didn’t think it could improve on the 24Competition product offering, but it has. Your trigger finger will feel the difference between the 24C and the TH24 as a definite step up. It sports a HIPERSHOE® finger rest in Tarheel blue colors and a Nickel based enhanced plating exclusive to the TH24 making the pull even smoother and more responsive with an MSRP of $275.