HIPERTOUCH Reflex & ECLipse: “I used a Reflex trigger on a LR-308 build and have never looked back. That was the nicest trigger I had ever used. Last Summer I built my grandson a nice LR-308 and put an Eclipse in it, and took it too the range, to setup the gas block. Don’t know how you did it but it is an even nicer trigger. My grandson really likes the Reflex trigger in his new rifle. This Spring I will be putting an Eclipse trigger in a new LR-308. Thank you for making a really game changing trigger.”

HIPERTOUCH Elite: “I just installed a Hyperfire Elite trigger in my AR-10. My goal was to cure some fail to fire issues due to light primer strikes using some foreign military surplus ammo. I have only installed an AR trigger once before and was thinking the Hyperfire trigger could be a problem for me to install. It was way easier than I thought. I did learn one trick to pass along. The trigger and hammer installation is very straight forward. Compressing the coil springs looked like a problem area. I used a 5/32 inch pin punch (flat working end) and cupped my free hand over the spring assembly to prevent lost springs. Success on the first attempt with no flying parts. The trick is to position the yoke just above the notch where it will rest. Push straight in and slightly downward and it falls right into place. The difference between the Elite trigger and military stock trigger is amazing.”